Sirona Spa Care Simply Sanitizer serves as the final step within the Sirona Spa Care Simply 3-Step System. It effectively sanitizes the water while providing protection against metal-induced staining and discoloration. Important: Sirona Spa Care Simply Sanitizer is incompatible with chlorinating and brominating chemical products.
Start Up Directions:
- Remove chlorine or bromine source and disconnect feeder. Discontinue use of ionizers and electrochlorinators if present.
- Drain existing water in spa or hot tub.
- Clean spa surface and filter.
- Fill spa with water.
- Have your authorized Sirona Spa Care dealer check your water for proper water balance.
- After water has been balanced, add Sirona Spa Care Simply Sanitizer to give a concentration of 50 ppm (1 oz of product per 150 gallons of spa water).
- Circulate water 15 minutes then check Sirona Spa Care Simply Sanitizer concentration with Sirona Spa Care Simply Test Strips and adjust if necessary.
Maintenance Directions:
- Every week, check Sirona Spa Care Simply Sanitizer concentration and pH. Adjust if necessary.
- When the level of Sirona Spa Care Simply Sanitizer is 30 ppm or less, add enough Sirona Spa Care Simply Sanitizer to bring the level up to 50 ppm. The spa's level of Sirona Spa Care Simply Sanitizer should never be allowed to drop below 30 ppm. To raise the Sirona Spa Care Simply Sanitizer level 10 ppm, add 0.2 fl oz per 150 gallons of spa water.
